Raised Access Floor
-
Anti-static steel raised access floor without edge (HDG)
The panel is made of high quality cold-rolled steel sheet. The bottom sheet is used ST14 stretched steel. Which are punched, spot-welded, coated with epoxy powder after being phosphoreted and infilled the foamed cement. The finish covered the HPL. PVC or others without edges. This panel is high capacity, easy installation, elegant appearance, fouling resistance, corrosion resistance, long using life, excellent waterproof and fireproof performance.
-
Wood core raised access floor (HDM)
The panel is made of High-density particle board. Bottom is galvanized steel sheet / Aluminum sheet. Edge is 4 pcs black PVC trim along each side of the panel. Cover is HPL / PVC or others according to the customer’s requirement. This type flooring is as same as imported floor. This product technical performance is equivalent to the imported flooring products with a high loading capacity, high wear-resistant factor, light weight, low environmental pollution, foot feeling well, also have soundproofing, shockproof, fouling resistance, corrosion resistance, high wear resistance, effective pavement , long using life etc.
-
Calcium sulphate raised access floor with Ceramic tile (HDWc)
It is composed of surface layer, edge sealing, upper steel plate, filler, lower steel plate, beam and bracket. The edge seal is a conductive black tape (no edge seal on the floor). Surface layer: generally PVC, HPL or ceramic. Anti-static floor steel plate: high quality cold rolled steel plate, one stamping molding, high dimensional accuracy. Bottom steel plate: deep tensile cold rolled steel plate, bottom special pit structure, increase floor strength, multi-head spot welding, surface electrostatic painting treatment, corrosion and rust prevention.
-
Calcium sulphate raised access floor (HDW)
Calcium sulphate raised floor – Flame retardant, sound insulation, dustproof and wear resistance, super load-bearing and pressure resistant
Calcium sulfate anti-static floor is made of non-toxic and unbleached plant fiber as reinforcement material, combined with solidified calcium sulfate crystal, and made by pulse pressing process. Floor surface is made of HPL melamine, PVC, ceramic tile, carpet, marble or natural rubber veneer, plastic edge strip around the floor and galvanized steel plate at the bottom of the floor. Because of its environmental protection, fire prevention, high intensity, level off and so on a lot of respects superiority, already became the material that overhead floor family uses most extensively.
-
Anti-static steel raised access floor panel with ceramic tile (HDGc)
Ceramic anti-static raised floor Product specification: 600*600*40 600*600*45 Product introduction: all steel anti-static raised floor is made of high quality alloy cold rolled steel plate, after stretching, spot welding forming. After phosphating, the outer surface is treated with electrostatic spraying, the inner cavity is filled with standard cement, the upper surface is pasted with 10mm thick ceramic (bare board without veneer), and the conducting electrostatic edge strip is inlaid around.
-
Anti-static steel raised access floor with edge (HDG)
The panel is made of high quality cold-rolled steel sheet. The bottom sheet is used ST14 stretched steel. Which are punched, spot-welded, coated with epoxy powder after being phosphoreted and infilled the foamed cement. The finish covered the HPL. PVC or others. The edges of panel are trimmed with 4 piece black PVC. This panel is high capacity, easy installation, elegant appearance, fouling resistance, corrosion resistance, long using life, excellent waterproof and fireproof performance.
All steel electrostatic floor without border
HDG600×600×35mm
-
Anti-static Aluminum raised access floor (HDL)
The aluminium panel is made of high purity die-casting aluminium, the bottom have high-strength grids, the finished covered HPL, PVC or others. This product has light weight,high loading capacity, excellent electricconductive effect, Class A fire effect, Class A fire resistance, non-combustible, clean, low environmental pollution long using life and recycling resource.
-
Wood core raised access floor panel with ceramic tile (HDMC)
The panel is made of high -density particle board. Bottom is galvanized steel shee / aluminium sheet. Edge is 4 pcs black PVCtrim along each side of panel. Cover is ceramic tile, marble or others according to the customer’s requirement. This type flooring is as same as imported floor. This product technical performance is equivalement to the imported flooring products with a high loading capacity, high-wear-resistant factor, light weight, low environmental pollution, foot feeling well, also have soundproofing, shockproof, fouling resistance, corrosion resistance, high wear resistance, effective pavement, long using life etc.
-
Perforated panel series(HDF)
All steel ventilated floor, the inner cavity is empty, no foamed cement packing; The upper and lower steel plates and the upper surface veneer of the floor are punched with ventilation holes for the places with ventilation requirements under the floor.
-
Permanent anti-static PVC flooring
Product name: Straight paving PVC anti-static floor
Product specification: 600*600*(2.0/2.5/3.0)mm
Product introduction: Straight paving PVC anti-static floor is based on POLYvinyl chloride resin, adding injection agent, stabilizer, filler, conductive electrostatic materials and mixed color materials by scientific ratio, polymerization thermoplastic molding.