1. Clean up the ground of the site where the elevated floor is to be installed, and ask the ground to be flat and dry. It should be the ground that has been leveled with cement mortar, and the height difference should be less than 4 mm measured with a 2 meter level.
2. Spring line positioning on the clean ground, to determine the position of each support.
3. Install the bracket at the fixed position, install the frame and adjust the height of the entire bracket.
4. Support beam assembly, at the same time adjust the beam level, it is recommended to use a laser level, and then tighten screws to fix the beam.
5. Install the raised floor and trim the edges of the raised floor.
After installing the floor, install the skirting line to protect and beautify the wall.
6. Clean the floor surface after construction.
If your office raised floor systems isn’t safe, it is not reliable – that’s the hard riddled truth and critical standard for my corporate buildings.
Fire hazard is a serious risk for businesses all around the globe and can stem from things like short-circuit, improper wiring, smoking materials, and faulty electrical equipment. A fireproof raised floor system is one of the best ways entrepreneurs can protect their organization from costly and devastating mishappening. Moreover, it establishes an effective fire safety plan.
The raised floor system should match the unique risks of an organization. Thinking of fire safety for your raised flooring in advance would help you build the right constructive plan of action for your company.
The good news is, these days, raised floor coverings are manufactured and tested with strict safety protocols & measured on various performance standards. And, if the fire resistance raised floor system is high on your list of priorities, this handy guide will help you decide the best fitting choice.
Post time: Feb-08-2022